Coastal care

Salt-air corrosion: protecting cooling equipment near the sea

What salt spray does to coils, casings and terminals, and the maintenance that slows it down.

What salt actually does

Sea spray carries salt particles that settle on outdoor equipment. Combined with moisture, that film becomes a mild electrolyte, and it attacks the aluminium fins of a condenser coil, the steel of screws and brackets, and the copper and brass of electrical terminals. The result is a coil that loses heat transfer, fixings that seize, and connections that corrode until the unit cuts out intermittently.

  • Aluminium fins pit and flatten, reducing airflow and heat rejection.
  • Fan blades and bearings corrode, causing noise and vibration.
  • Screw heads and bracket fixings seize, making future service harder.
  • Electrical terminals develop resistance, causing voltage drop and heat.

Maintenance that makes a difference

The most effective measure is regular, gentle rinsing of the outdoor coil with the power off, followed by a check of the electrical connections and the condition of the casing. Cleaning removes the salt before it can hold moisture against the metal for weeks.

  • Rinse the outdoor coil with low pressure water, power isolated, a few times a year.
  • Keep the unit off the ground and away from sprinklers and gutter downpipes.
  • Ask for coastal-rated brackets and corrosion-resistant fixings at installation.
  • Have terminals inspected and protected during servicing.
  • Replace corroded screws and fittings rather than forcing them.

What not to do

Do not use a high-pressure washer close to the coil: it flattens the fins and drives water into places it cannot escape. Do not paint over a coil or coat it in products not intended for that purpose. And do not ignore a small amount of white powder on the fins, because that is the beginning of the process, not a cosmetic issue.

Common questions