Faults

Ice machine not making ice: water, air and cleaning

Most ice machine failures trace back to water supply, condenser airflow or scale.

Water in, ice out

An ice machine is a small refrigeration system wrapped around a water circuit. If the water supply is restricted, the inlet valve is scaled or the filter is spent, the machine cannot fill the mould and production drops or stops. Check that the water tap is fully open and that the filter has been changed on schedule.

Airflow and ambient temperature

The condenser has to get rid of heat. In a closed cupboard, against a wall or with a dust-clogged coil, the machine overheats and either slows down or stops harvesting. Coastal humidity adds to the load, so a machine that was adequate inland can struggle in a Muizenberg summer kitchen.

  • Leave the clearances the manufacturer specifies around the unit.
  • Clean the condenser coil and the air filter regularly.
  • Keep the machine out of direct sun and away from ovens or fryers.

Scale, slime and the harvest cycle

Hard water leaves scale on the evaporator, which insulates it and makes cubes stick. Warm, damp conditions encourage slime in the bin and around the curtain. A machine that freezes but will not release the ice usually has a harvest sensor, hot gas valve or scale problem, and that needs diagnosis.

Common questions